3 dog design co.
Eratta
Contact Information (please allow 2 business days for a reply)
Aspen
Updated Cutting
Fabric L, cut:
(10) 5 1/4’’ x WOF (13.33cm x WOF) strips. Sub-cut into:
(72) 5 1/4’’ x 5 1/4’’ (13.33cm x 13.33) Piece 5 squares.
Step 9....Flying Geese will measure 2 1/2'' x 4 1/2'' (6.35cm x 11.43cm)
Seeing Spots 2.0
Updated Cutting
Fabric B, cut:
(4) 4 1/4‘’ x WOF (10.79cm x WOF) strips. Trace and cut (10) Piece B and (10) Piece B Reversed.
Fabric C, cut:
(2) 15 3/8‘’ x WOF (3905cm x WOF) strips. Sub-cut into:
(3) 15 3/8‘’ x 15 3/8‘’ (39.05cm x 39.05cm) squares. Cut each square on the diagonal TWICE for (10) SIde Setting Triangles.
(2) 10 1/2‘’ x WOF (26.67cm x WOF) strips. Sub-cut into:
(8) 10 1/2‘’ x 10 1/2‘’ (26.67cm x 26.67cm) squares.
(1) 7 7/8 ‘’ x WOF strips. Sub-cut into:
(2) 7 7/8 ‘’ x 7 7/8 ‘’ squares. Cut each square on the diagonal ONCE for (4) Corner Triangles.
(1) 3 3/4‘’ x WOF (9.52cm x WOF) strip. Sub-cut into:
(6) 3 3/4‘’ x 3 3/4‘’ (9.52cm x 9.52cm) squares. Trace and cut (6) Piece A.
(1) Template C circle.
Radiant
Updated Yardage
Fabric H - 1 1/4 yards (1.14m)
Fabric J - 5/8 yard (0.57m)
Ripple
Fabric I:
The third set of cutting instructions should read as follows:
Cut (1) 3'' x WOF (7.62cm x WOF) strip.
Sub-cut: (12) 3'' x 3'' (7.62cm x 7.62cm) squares. Cut each square on the diagonal once for (24) half-square triangles.
For the Square Blocks Sections N9, L9, S9.
Magical
Place a 3 1/4" (8.26cm) Fabric M square and a matching Fabric O square right sides together (Fig. 1a). Using the drawn line as a guide, stitch a scant 1/4'' (6mm) from both sides of the line (Fig. 1b). Cut apart on the drawn line to yield two half-square triangle (HST) units (Fig. 1c). Press the seam allowances in the direction indicated by the arrow (Fig. 1d). Trace the HST Trimming Template onto template plastic and trim each HST unit using the HST Trimming Template. Please email matt@3dogdesignco.com for the HST trimming template.
Enchanted
Replace Figured 1 and 2 with the following.
Strata Bargello
Update all yardages to 1/2 yard (0.46m)
Cut (6) 2 1/2'' strips from each fabric.
Double the strips cut on Steps 3 and 4.